CinefieldĀ® Metal Waves

I had been about a quarter of the way through a full sized CinefieldĀ® when my computer gave up the ghost. This meant I couldn’t use my printer, needed for components. I Switched to doing a painting. The computer I ordered taking it’s time to get to me. I missed doing CinefieldĀ® work

I decided to use my pocket printer and do a smaller piece. Having the luxury of no deadline and no expectations of a collector, I decided to try some new things:

I inserted an In the Eights figure into the work (female figure for those not familiar with my 8’s project)

The pictures are printed on thicker, instant film like paper. When I initially was figuring out methodology with these materials, I used my regular adhesive. If that comes in contact with picture side of the film, it immediately clouds it. I Switched to glue sticks. Problem with that was that it secures the pieces only temporarily. Often times I would lay a piece down only to have a different piece fly off. For this piece I used regular adhesive, applied with a tiny brush as to control it. The tricky part was that I had to lay each piece exactly where it was meant to go because of the adhesive. A piece lain wrong I might be able to pick up but then adhesive had touched other parts.

The nature of pocket printer pieces is they are thicker and rigid so it’s an impossibility to get the pieces flat and flush. The visible seams/edge are part of the look.

The piece is 4×4 inches. All the photos are by me except the female photo which was done for me. The clock image is from photo I took of Orsay Museum clock in Paris.